Sharp AR-C260P, Operation Manual

Page: 32 / 78

LOADING PAPER
2-14
Structure of the bypass tray setting menu
"BYPASS TRAY PAPER SELECTION" consists of the levels shown below.
To move through the settings on any level, press the [
] key or [ ] key.
To select a setting or store a selection for a setting, press the [OK] key.
To move back to the previous level after completing a setting or to cancel the selection of a setting, press the
[BACK/C] key.
To correct an accidental selection, press the [BACK/C] key.
If the type of the paper loaded in the bypass tray is either plain, letter head, pre-printed, pre-punched, recycled
or colour, select "PLAIN" for the bypass tray paper type in LEVEL2 operation.
[OK]
[BACK/C]
[BACK/C]
[OK]
[OK]
[OK]
[OK]
[BACK/C]
[OK]
[OK]
[BACK/C]
[OK]
[BACK/C]
No paper in
the bypass tray
LEVEL1 LEVEL2 LEVEL3
A4
UNKNOWN TYPE
ADD PAPER ONTO
BYPASS-TRAY
BYPASS TRAY PAPER
SELECTION OK?
[ ] [ ]
Select the paper type
with the or key
• COM-10
• MONARCH
• C5
• DL
The setting is stored.
The setting is stored.
The setting is stored.
The setting is stored.
If plain or heavy1 or
heavy2 is loaded in the
bypass tray, select the
paper type with the
or key.
If transparency S or
transparency Q is
loaded in the bypass
tray, select the paper
type with the or key.
If an envelope is loaded
in the bypass tray, select
"ENVELOPE OK?" with
the or key.
LEVEL4
Set the X dimension and
then the Y dimension of
the non-standard size
using the or key,
pressing the [OK] key
after each.
If a standard size of
paper is loaded, select
"AUTO SIZE
DETECTION ENABLE"
with the or key.
If a non-standard size of
paper is loaded (see
page 2-9), select "AUTO
SIZE DETECTION
DISABLE" with the or
key. BYPASS TRAY PAPER SELECTION