Sharp AR-C250 Operation Manual Download

Page: 93 / 161

5-3

CHAPTER

MISFEED REMOVAL

COPIER TROUBLE?

Misfeed removal

(A) Open the feeding roller cover and pull the original gently

to the right and out from the document feeder tray.

●

Be sure to open and close the document feeder cover to cancel
the misfeed display.

(B) Open the exit roller cover and gently pull the original

out.

●

Be sure to open and close the document feeder cover to cancel
the misfeed display.

(C) Open the feeding roller cover and the document feeder

cover, and remove the original.

NOTE:
After misfed originals are removed from locations A, B and/or C, a
message may appear indicating the number of originals which must
be returned to the document feeder tray. Return the originals and
press the START key to resume copying.

Misfeed in the bypass tray

Open the front cover.

Feeding roller cover

Exit roller cover

MISFEED HAS OCCURRED.

CLEAR INDICATED AREA.

PRESS FOR RECOVERY INSTRUCTIONS.

Summary of Contents for AR-C250


































































































































































Search results

Summary of Contents for AR-C250

Reviews:

Related manuals for AR-C250

Brands by name

Popular brands

Sharp AR-C250, Operation Manual

Search results

Summary of Contents for AR-C250

Reviews:

Related manuals for AR-C250

Brands by name

Popular brands