AR-5618S MAINTENANCE 9-2
2. Maintenance display system
*1: Installation of a new toner cartridge allows to display the remaining
quantity.
3. Note for replacement of consumable parts
A. Toner cartridge
When a waste toner cartridge is removed from the machine, it must be
put in a polyethylene bag to avoid scattering of toner.
B. DV cartridge
Do not shake or put up the developer cartridge. Otherwise developer
may scatter.
C. DV seal attachment procedure
Toner
Life,
16K
Remaining
quantity
check *1
a. Press and hold the [Light] keys ([Light
and Dark] keys) for more than 5 sec, and
the machine will enter the user program
mode.
b. Press and hold the [%] key for more
than 5 sec, and the remaining quantity
will be displayed on the copy quantity
display in one of the following levels:
(Remaining quantity display levels:
100%, 75%, 50%, 25%, 10%, LO)
c. Press the [Light] keys ([Light and Dark]
keys) to cancel.
Remaining
quantity
NEAR EMPTY
About 10%
EMPTY
LED
ON
Flash
Machine
Operation allowed
Stop
Developer
Life
50K
LED
ON at 50K of the
developer count
Machine
Selection is available between Not Stop
and Stop by Service Simulation (SIM 26-
37) Setup.
(If Stop is selected, the LED will flash and
stop at 50K.)
*
Default: Not Stop
*
Clear: SIM 42-1
Maintenance LED
Selection is available among 50K, 25K,
10K, 7.5K, 5K, and free (no lighting) with
SIM 21-1.
*
Default: 50K
*
Clear: SIM 20-1
Machine
Not stop
Cle
a
r
a
nce with the
molt edge.
M
us
t not
b
e covered.
Att
a
ch with the
projection (ri
b
)
reference
Att
a
ch with the
line (m
a
rk-off line)
reference.
0
0
0.5
0.
3
0
0
0.
3
0.5
(When viewed from the front)
(When viewed from the front)
S
ide molt F
Cle
a
r
a
nce with the
molt edge.
M
us
t not
b
e covered.
Molt edge
reference
DV
S
ide
s
heet F
S
ide molt R
Molt edge
reference
DV
S
ide
s
heet R
