Sharp AR-5618N, Service Manual

Page: 32 / 93

AR-5618S SIMULATIONS 7-2
：
'11/Jul/22
1
24 01 Jam total counter clear
02 Trouble memory clear
04 SPF counter clear
05 Duplex print counter clear
06 Paper feed counter clear
07 Drum counter clear
08 Copy counter clear
09 Printer counter clear
13 Scanner counter clear
14 SPF jam total counter clear
15 Scanner mode counter clear
25 01 Main motor operation check
02 Auto developer adjustment (Initial setting of toner
density when replacing developer)
10 Polygon motor operation check
26 02 Size setting
03 Auditor setting
04 Copier duplex setting
05 Count mode setting
06 Destination setting
07 Machine condition check (CPM)
18 Toner save mode setting
30 CE mark conformity control ON/OFF
31 Auditor mode exclusive setup
36 Cancel of stop at maintenance life over
37 Cancel of stop at developer life over
38 Cancel of stop at drum life over
39 Memory capacity check
42 Transfer ON/OFF timing control setting
43 Side void amount setting
51 Copy temporary stop function setting
54 Life correction ON/OFF setting
69 Used to set the operating for toner end
30 01 Paper sensor status display
42 01 Developing counter clear
43 01 Fusing temperature setting
02 Setting of item related to fusing temperature
03 Fusing temperature set value in preheating
04 Fusing temperature correction setting
10 Postcard paper feed cycle setting
12 Standby mode fusing fan rotation setting
13 Fusing paper interval control allow/inhibit setting
44 01 Toner density control Enable/Disable (ON/OFF) setting
16 Toner density control data check and toner density
control correction amount display
34 Transfer current setting
46 02 Copy density adjustment (600dpi)
10 Copy exposure level adjustment, individual setting
(Text) 600dpi
11 Copy exposure level adjustment, individual setting
(Photo) 600dpi
19 Exposure mode setting
(Gamma table setting/AUTO exposure operation mode
setting/Photo image process setting)
20 SPF exposure correction
29 Image contrast adjustment (600dpi)
30 AUTO exposure limit setting
31 Image sharpness adjustment
Main
code Sub
code
Contents
48 01 Main/sub scanning magnification ratio adjustment
05 SPF/RSPF mode sub scanning magnification ratio
adjustment in copying
49 01 Flash ROM program writing mode (MCU)
02 Flash ROM program writing mode (NNB)
50 01 Image lead edge adjustment
06 Copy lead edge position adjustment (SPF/RSPF)
10 Paper off-center adjustment
12 Document off-center adjustment
18 Memory reverse position adjustment in duplex copy
19 Rear edge void adjustment in duplex copy
51 02 Resist amount adjustment
53 08 SPF scanning position automatic adjustment
10 SPF document scan position select setting
60 01 SDRAM (image memory area) access check
61 02 Laser power correction ON/OFF (Invalidity)
03 HSYNC output check
63 01 Shading check
07 SPF automatic correction
64 01 Self print
Main
code Sub
code
Contents
1
1
1
1
1