16
MAKING COPIES
Reduction/enlargement/zoom
REDUCTION/ENLARGEMENT/ZOOM
Reduction and enlargement ratios can be selected either automatically with the AUTO IMAGE (
)
key or manually with the PRESET RATIO selector (
,
) keys and/or the zoom (
,
) keys. The
zoom function enables precise copy ratio selection from 50% to 200% in 1% increments.
Automatic
1
Place the original on the original table and close the
platen cover.
2
Press the ORIGINAL SIZE ENTER (
) key until the
indicator for the size of the original on the original table
lights up.
●
This feature will not work when copy paper of non-standard size is
used or the bypass tray is used.
3
AR-5120 only Use the TRAY SELECT (
) key to select
the paper tray with the desired paper size.
4
Press the AUTO IMAGE (
) key.
●
The copy ratio will be automatically set.
●
If a PRESET RATIO indicator is blinking, part of the original image
may not be copied.
If the orientation of the original does not correspond to
standard reduction/enlargement ratios for the selected
paper tray, then the ORIGINAL SIZE indicator will
blink. Change the orientation of the original.
5
Set the number of copies.
6
Press the START (
) key.
●
To cancel the automatic reduction/enlargement
mode, press the AUTO IMAGE (
) key again.
●
When copying from an optional SPF with this feature,
the automatic reduction/enlargement mode will be
automatically cancelled after copying is complete.
Summary of Contents for AR-5015 N
Page 56: ...54 GENERAL INFORMATION MEMO ...
Page 63: ...61 MEMO ...
