Sharp AR-287 Operation Manual Download

Page: 104 / 184

6-2

CHAPTER

PART NAMES AND FUNCTIONS

Exterior

Exit area cover
Open to remove misfed paper.

Power switch
Press to turn copier power on and off.

Exit tray (optional)
Finished copies are deposited in the exit tray.

Operation panel
All copier controls are located here for easy
operation.

Document feeder indicators

Original feed indicator

Indicates the originals in the tray will be fed.

Original reminder

Indicates an original is still on the document glass.

RADF feeding roller cover
Open to remove misfed originals.

Original guides
Adjust to the size of the originals.

Document feeder tray
Holds up to 50 originals.

RADF exit area
Finished originals are output here.

RADF exit roller cover
Open to remove misfed originals.

Paper trays
Each tray holds 500 sheets of paper.

Front cover
Open to remove misfeeds and to service the
copier.

Handles

Right side cover
Open to remove misfeeds in the paper feed area.

Toner collecting container cover
Open to replace the toner collecting container.

Document glass
All originals which cannot be copied from the
RADF must be copied here.

Paper clip tray
Keep paper clips here.

GENERAL INFORMATION

Part names and functions

Summary of Contents for AR-287

























































































































































































Search results

Summary of Contents for AR-287

Reviews:

Related manuals for AR-287

Brands by name

Popular brands

Sharp AR-287, Operation Manual

Search results

Summary of Contents for AR-287

Reviews:

Related manuals for AR-287

Brands by name

Popular brands