Sharp AR-207 Operation Manual Download

Page: 41 / 84

SPECIAL FEA

TURES

ERASE

This copier has an edge erase mode and a center erase mode.

●

Edge erase can be used to eliminate shadow lines around the edges of
copies caused when thick paper or a book is used as an original.

●

Center erase can be used to eliminate the shadow produced by the
bindings of bound documents.

●

Edge + center erase can be used to eliminate shadow lines around the
edges of copies and to eliminate the shadow at the center of copies.

●

The erase width can be set from 0" to 1" in five steps using user program
No. 16. See page 51.

●

This feature cannot be used with the 2 in 1 or 4 in 1 feature.

Place the original on the original table and close the
document feeder cover.

●

The RSPF can also be used for this feature.

Press the ERASE key to select the desired erase mode.

●

To select the EDGE + CENTER ERASE mode, press the ERASE key
until both the EDGE and CENTER indicators light up.

Ensure that the desired copy paper size is selected.

●

The bypass tray and any tray with non-standard size paper cannot be
used for this feature.

A B

Center erase

Edge + Center erase

Edge erase

Erase

Summary of Contents for AR-207





















































































Search results

Summary of Contents for AR-207

Reviews:

Related manuals for AR-207

Brands by name

Popular brands

Sharp AR-207, Operation Manual

Search results

Summary of Contents for AR-207

Reviews:

Related manuals for AR-207

Brands by name

Popular brands