Sharp AR 168D - Digital Imager B/W Laser, Service Manual, Page: 65 / 184

AR-168S/168D DISASSEMBLY AND ASSEMBLY 8 - 22
10. Duplex motor section (RSPF model only)
A. List
B. Disassembly procedure
1) Remove the rear cabinet.
2) Remove two screws.
3) Remove the Duplex motor cover.
4) Remove the Duplex motor.
Note: When reassembling, be sure to engage the Duplex motor gear
with the belt on the main body side.
C. Assembly procedure
For assembly, reverse the disassembly procedure.
11. Reverse roller section (RSPF model
only)
A. List
B. Disassembly procedure
1) Remove four screws
2) Remove the spring, and the earth wire
3) Remove the reverse unit.
4) Bend the reverse roller and remove it.
C. Assembly procedure
For assembly, reverse the disassembly procedure.
12. RSPF section (RSPF model only)
A. RSPF
(1) Remove the rear cabinet.
1) Remove four screws.
2) Remove the rear cabinet.
(2) Remove the RSPF.
1) Remove the connector and the cable.
2) Remove the RSPF.
No. Part name Ref.
1 Duplex motor
No. Part name Ref.
1 Reverse roller
1
2
3
1
1
2
3
1
4)
1)
3)
2)