manualshive.com logo in svg

Sharp AR 168D - Digital Imager B/W Laser, Service Manual, Page: 178 / 184

Share
Download
Sharp AR 168D - Digital Imager B/W Laser Service Manual Download Page 178

AR-168S/168D  FIRMWARE DOWNLOAD PROCEDURES  15 - 8

<Installation on Windows Me>

1) Main unit side: Execute Test command No. 49-01 (Flash ROM pro-

gram write mode).

Check that "DOWNLOAD MODE" is displayed on the LCD of the
operation panel. (Press and hold [CA] key and [DOWN] key (left
key) together, and turn on the power simultaneously.)

2) Connect the machine and the PC with a USB cable.

3) The following display is shown on the PC side.

Select [Specify the location of the driver], and press <Next> button.

4) Select [Specify a location], specify the folder which includes the

maintenance tool driver (Mainte.inf) as the search location, and
press <Next> button.

If the search location does not include the maintenance tool driver
(Mainte.inf), press <Browse> button to specify the folder which
includes the maintenance tool driver (Mainte.inf).

(Suppose that the maintenance tool driver is included in 
C:\MaintenanceTool\Drivers\Win9xMe folder.)

5) Select the folder which includes maintenance tool driver

(Mainte.inf), and press <OK> button.

(Suppose that the driver is included in 
C:\MaintenanceTool\Drivers\Win9xMe folder.)

6) Check that the path to the folder which includes the maintenance

tool driver (Mainte.inf) is displayed, and press <Next> button.

7) When the following display is shown, installation is completed.

Press <Finish> button.

8) Restart the PC.

With the above procedures, installation (on Windows ME) of the inte-
gration maintenance program is completed.

Summary of Contents for AR 168D - Digital Imager B/W Laser

























































































































































































Reviews:

No comments