Sharp AR 168D - Digital Imager B/W Laser, Service Manual, Page: 61 / 184

AR-168S/168D DISASSEMBLY AND ASSEMBLY 8 - 18
8. Power section
A. List
B. Disassembly procedure
1) Disconnect each connector.
2) Remove the screw, and remove the earth line.
3) Remove two screws, and remove the power PWB unit.
C. Assembly procedure
For assembly, reverse the disassembly procedure.
9. SPF section (SPF model only)
(1) Remove the rear cabinet.
1) Remove four screws.
2) Remove the rear cabinet.
(2) Remove the SPF.
1) Remove the connector and the cable.
2) Remove the SPF.
Pickup unit removal
1) Remove three fixing pawls from the bottom of the machine.
2) Remove the front cover and the rear cover.
No. Part name Ref.
1 Power PWB
No. Part name Ref.
A Sensor PWB
B Pickup solenoid
C Clutch
D Manual paper feed roller, pickup roller
E Belt
F SPF motor
G Paper entry sensor
H PS roller
I Paper exit roller
1) 1)
1)
1)
2)
3)
4)
4)
5)
1)
4)
1)
3)
2)
1
2
2