Assembly: Put the paper guide earth spring (A) under the paper
guide (B) before fusing.
Disassembly: There are three pawls on the fusing cover. Remove
the screws and slide the fusing cover to the right to
remove.
The heater lamp is fixed on the fusing cover with a
screw. Slide the fusing cover to the front and remove
the screw, then remove the heater lamp.
Assembly:
Put the fusing harness (A) on the heater lamp (B) as
shown in the figure and fix them together.
Place the fusing harness inside the rib (C).
E. Upper heat roller
F. Separation pawl
(3)
(4)
(3)
(B)
(A)
( 6 )
( 5 )
( 8 )
( 9 )
( 7 )
( 8 )
( 1 0 )
( A )
( B )
( C )
( 2 )
( 1 )
( 4 )
( 3 )
( 3 )
(2)
(1)
(2)
(2)
(1)
(1)
(3)
(3)
AR-205 [11] DISASSEMBLY AND ASSEMBLY 05/24/1999
AR-205
11 – 4
