For example, to change the setting of the auto power shut-off timer to
60 min., press key 2.
Program name
Parameters
Auto clear time
0
OFF
1
30sec
∗
2
60sec
3 90sec
4
120sec
5
10sec
Preheat mode
∗∗
0
OFF
∗∗
1
30sec
2
60sec
∗
3
90sec
4
120sec
Auto power shut-off timer
∗
1
30min
2
60min
3
90min
4
120min
5
240min
Stream feeding mode
∗
0
OFF
1
ON
Auto power shut-off setting
0
OFF
∗
1
ON
Border line for 2 in 1 or 4 in 1
∗
0
OFF
1
ON
Rotation copy
0
OFF
∗
1
ON
Auto paper select mode
0
OFF
∗
1
ON
Auto tray switching
0
OFF
∗
1
ON
Erase width adjustment
0
0mm (0")
1
5mm (1/4")
∗
2
10mm (1/2")
3
15mm (3/4")
4
20mm (1")
Layout in 2 in 1 copy
∗
1
Pattern 1
2
Pattern 2
Layout in 4 in 1 copy
∗
1
Pattern 1
2
Pattern 2
3
Pattern 3
4
Pattern 4
Offset of paper output tray
0
Upper OFF,
lower OFF
∗
1
Upper ON,
lower ON
2
Upper ON,
lower OFF
3
Upper OFF,
lower ON
Image rotation in duplex copying
∗
0
OFF
1
ON
Location of the margin
∗
1
Left
2
Top
Factory default settings are indicated with an asterisk (
∗
).
∗∗
In European countries, the default setting of the preheat mode is 1
(30 sec.). For other programs, factory-default settings in these
countries are same to those shown above with an asterisk (
∗
).
Note: If you select "0" (OFF) in a program, the corresponding function
will be disabled.
5) Press the START key.
●
The right-hand number in the copy quantity display will be
steadily lit and the entered value will be stored.
6) To continue with other user programs, press the © key and then
repeat steps 2 to 5. To exit the user program mode, press the light
( ) key.
●
All the alarm indicators will go out.
Settings for auditing accounts
A. Program No. 10: Auditing mode
If the auditing mode is enabled, copying is limited to operators with an
assigned 3-digit account number. A maximum of 20, 3-digit account
numbers can be assigned. Use program No. 11 to register account
numbers.
When program No. 10 is entered, the current setting (0: OFF, 1:ON)
will blink on the right side of the copy quantity display.
1) Select the desired setting using the numeric keys.
0: OFF
1: ON
2) Press the START key.
●
The setting will be stored.
3) To continue with other user programs, press the © key and enter
another program number. To exit the user program mode, press
the light ( ) key.
B. Program No. 11: Account number entry
Program No. 11 is used to register accounts. When program No. 11 is
entered,
1) Enter a 3-digit account number using the numeric keys.
●
Any 3-digit number except "000" can be registered as an ac-
count number.
2) Press the START key.
●
If a number that is already registered or "000" is entered, the
number will blink in the copy quantity display.
3) Repeat steps 1 and 2 for other account numbers.
4) To continue with other user programs, press the © key and enter
another program number. To exit the user program mode, press
the light ( ) key.
C. Program No. 12: Account number change
Program No. 12 is used to change account numbers. When program
No. 12 is entered, an account number will appear in the copy quantity
display.
●
If no account number has been registered, "12E" will appear in
the copy quantity display. Press the © key. The system will
return to step 2 on page 39.
1) Use the copy ratio display ( ) key to select the account number
to be changed.
●
Use the key to advance through the account numbers.
2) Press the START key.
●
The account number will be erased and "- - -" will blink in the
copy quantity display.
3) Enter a new account number using the numeric keys.
4) Press the START key.
●
If a number that is already registered or "000" is entered, the
number will blink in the copy quantity display.
5) Repeat steps 1 to 4 for other account numbers.
6) To continue with other user programs, press the © key and enter
another program number. To exit the user program mode, press
the light ( ) key.
D. Program No. 13: Account number deletion
●
If no account number has been registered, "13E" will appear in
the copy quantity display. Press the © key. The system will
return to step 2 on page 39.
1) To delete an individual account, press the 0 key.
To delete all accounts, press key 1.
2) Press the START key.
AR-205
8 – 2
