80
Data Communication
To register/connect a Bluetooth device, the Bluetooth passkey
may need to be entered. Before starting the registration, decide
one- to sixteen-digit number. Enter the same number on the
tablet and the other party's Bluetooth device.
Set the other party's Bluetooth device to the registration stand-by
status in advance.
1
In the home screen, [
R
]
/
[Settings]
/
[Bluetooth]
2
Set to On
3
Select a Bluetooth device
/
[PAIR]
:
The confirmation screen for connection may be displayed.
:
Entering the Bluetooth passkey may be necessary
depending on the other party's Bluetooth device. Also, some
Bluetooth devices may start connection after completing
registration.
:
To search for Bluetooth devices: [
z
]
/
[Refresh]
:
Touch [
B
] of a paired Bluetooth device to set name and
intended purpose of the other party's Bluetooth device.
ɡ
When receiving registration request from Bluetooth
device or connection request from unregistered
Bluetooth device
1
Registration request/Connection request from
Bluetooth device
2
Drag the status bar down
/
[Pairing request]
/
[PAIR]
:
When the confirmation screen about the settings on pairing
appears, select [PAIR].
:
Entering the Bluetooth passkey may be necessary
depending on the other party's Bluetooth device.
:
The confirmation screen for connection may be displayed.
ɡ
Unregistering Bluetooth device
1
In the Bluetooth screen, [
B
] of the Bluetooth
device to unregister
/
[FORGET]
ɡ
Disconnecting Bluetooth device
1
In the Bluetooth screen, select the Bluetooth
device to disconnect
/
[OK]
ɡ
Setting Bluetooth
Set after setting [Bluetooth] to On.
1
In the Bluetooth screen, [
z
]
2
Select an item
Refresh
: Search for the Bluetooth device.
Rename this device
: Change the tablet's name.
aptX
: Set whether to use aptX
®
.
Handsfree setting
: Set whether to always have voices output
from the connected Bluetooth compatible hands-free device
during a voice call.
Show received files
: Display the history of data received via
Bluetooth connection.
ɡ
Sending data
Example: Still picture
1
In the home screen, [
R
]
/
[Contents
Manager]
/
[Photo]
2
Touch and hold a still picture
/
[Share]
/
[Bluetooth]
:
Set the receiver's Bluetooth device to the reception stand-by
status.
3
Select a Bluetooth device to connect to
ɡ
Receiving data
1
Data is sent from the sender's Bluetooth device
2
Drag the status bar down
/
select the incoming
notification
/
[ACCEPT]
3
Drag the status bar down
/
select the received
data
Using Bluetooth function
You can connect up to seven Bluetooth devices at the same
time. Bluetooth devices may not work properly or the number of
Bluetooth devices which can be connected at the same time
may differ depending on the profile.
If you fail to connect a Bluetooth device, connection may
become available after re-registering it.
When [Bluetooth] is set to On, the tablet is set to receive
registration requests/connection requests from other Bluetooth
devices. Make the setting for displaying the tablet's information
on other Bluetooth devices in advance to allow the tablet to be
searched for by other Bluetooth devices.
While in connection stand-by, even if a connection request from
a Bluetooth device is received, connection may not be made
depending on the signal status etc.
For details on the operations of the other party's Bluetooth
device, refer to the manuals of the Bluetooth device to be used.
[aptX]
When you enable [aptX], sounds may not be output depending
on the Bluetooth device. In this case, disable [aptX].
Sending and receiving by Bluetooth
Note that if you select [Delete and register] when receiving all
data, all data registered to the target function are deleted.
Receiving all data may not be available depending on the data
type.
When available space in the save destination becomes
insufficient while receiving data, the data being received to that
point are saved and receiving ends.
