Booting state
Skin setting
NOTE
• “TV”: When turn on the TV, it displays TV mode.
• “Smart home”: When turn on the TV, it displays the smart
home.
You can set booting state between "TV" and "Smart
home".
You can change the skin of smart home.
Select from "Colour Surge" or "Minty Fresh".
According to your needs to set the options table.
Language
You can select a language from the menu.
Select from among 3 languages: “English”,
“
繁
體
中文
”
or “
简体中文
”.
.
Settings
General
Mouse
No signal power off
You can set the TV to automatically power off in about
15 minutes after the TV goes into a state of receiving
no programme signals.
Five minutes before the power shuts down, the
remaining time displays every minute.
NOTE
• The initial installation of the TV is “IQQI-International”.
• If you use any other input method, SHARP cannot
guarantee its compatibility with television system.
Default input method
For setting input method.
23
Watching TV
Selected item
Description
STANDARD
For a highly defined
image in a normally
bright room.
MOVIE
For viewing the movies.
GAME
Lowers image brightness for easier
viewing.
USER
Allows the user to customise settings as
desired. You can set the mode for each
input source.
DYNAMIC
For a clear-cut image emphasising high
contrast for sports viewing.
DYNAMIC
(Fixed)
Changes the image and sound settings to
the factory preset values. No adjustments
are allowed.
AV mode
The “AV mode” function enables you to select
appropriate settings for audio and video to account for
the system environment.
NOTE
• You can select a different “AV mode” item for each input
mode.
Auto power-off at a designated time.
You can choose from “Off”, “30min.”, “60min.”,
“90min.”, “120min.” or “150min.”.
NOTE
• When the time has been set, countdown automatically
starts.
• Five minutes before the preset of time expires, the
remaining time displays each minute.
Video
Set the video as you desired .
Illumination
Starting sound
You can change the illumination setting.
Select from “On”or “Off ”.
You can change the starting sound setting .
Select from“On” or “Off ”.
Set up the sensitivity of the mouse function. You can
select from “High”, “Middle” or “Low”.
Sleep timer
