7
System cable
Display (rear view)
Setting the System
After putting the Display and the AVC System in place, connect the system cables and AC cords. Use the
cable clamps for bundling the cables.
Preparation
Press down the six
upper hooks to remove
the cover toward you.
Connecting the system cable and the AC cord to the Display
1
2
3
Removing the terminal cover
Connecting the system cable and the AC cord to the AVC System
CAUTION
•
TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
Press the two hooks
toward the centre of the
Display and remove the
cover toward you.
• Check the alignment of the
terminals before inserting.
AC Cord
• Plug in the AC cord
completely into the
terminal.
NOTE
* When you unplug the WHITE system cable, make sure you unscrew the screws thoroughly before unplugging the cable.
** When you unplug the GREY system cable, press the hooks on both sides of the cable inward as you unplug the cable gently.
System cable
(GREY)**
Connect the plug firmly until the hooks on
both sides click.
(WHITE)*
Connect the plug into the terminal and secure
it by tightening the thumb screws.
(BLACK)
System cable
AVC System (rear view)
AC cord
(GREY)
(BLACK)
Cable tie
Tie up the black and grey
cables after inserting
system cables. (Follow
instructions for preventing
cables being pulled out.)
(GREY)**
(BLACK)
(WHITE)*
LC-65G5X(E)-a
05.10.17, 7:33 AM
7
