Sharp Aquos LC 65D64U, Service Manual

Page: 8 / 152

LC-65D64U
2 – 3
Vertical mounting Angular mounting
0
O
/ 5 O
/ 10 O
Removing the stand
Before detaching (or attaching) the stand, unplug the AC cord from the AC INPUT terminal.
CAUTION
Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
Before attaching/detaching the stand
Before performing work make sure to turn off the TV.
Setting the TV on the wall
CAUTION
This TV should be mounted on the wall only with the AN-65AG1 (SHARP) wall mount bracket. The use of other wall
mount brackets may result in an unstable installation and may cause serious injuries.
Installing the TV requires special skill that should only be performed by qualified service personnel. Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting
that results in accident or injury.
Using an optional bracket to mount the TV
You can ask a qualified service professional about using an optional AN-65AG1 bracket to mount the TV to the wall.
Carefully read the instructions that come with the bracket before beginning work.
Hanging on the wall
AN-65AG1 wall mount bracket.
(See the bracket instructions for details.)
Unfasten the four screws used to secure the stand in
place.
Detach the stand from the TV.
Appendix
NOTE
To attach the stand, perform the above steps in reverse order.
1 2
NOTE
Detach the cable clamp on the rear of the TV when using the optional mount bracket.
To use this TV mounted on a wall, remove the covers at the 4 locations on the rear of the TV, and then use the screws
supplied with the wall mount bracket to secure the bracket to the rear of the TV.
About setting the TV angle