44
Time shift +
You can enjoy DTV/SAT recording or playback by
connecting a commercially available USB storage
device to the TV.
• Time shift + does not work for ATV, external inputs, data
broadcasts, radio broadcasts or network applications.
Connecting a USB storage device
Connect a commercially available USB storage
device to the USB port of the TV.
• USB storage device: USB memory or USB HDD
• Be sure to read the operation manual for the USB
storage device.
• At least USB storage devices with memory between
1GB and 2TB and under are required for time shift to
register.
• The USB 2 (HDD) port is compatible with portable USB
HDD which can operate with the power supply from the
USB port (bus powered drive).
• Refer to
Disconnect the USB storage device
when
removing the USB storage device (do not remove the
USB storage device during time shift operation).
NOTE
• The supplied USB memory is used for the operation
manual of this TV and may not be used for time shift.
• Time shift may take a few moments to start after the TV
is turned on.
• This function may not work properly for some USB
storage devices.
• Do not connect and disconnect a USB storage device
from the TV repeatedly.
USB storage device registration
It is necessary to first perform USB storage device
registration for USB storage devices used for time
shift.
Directly connect only one USB storage device to
the USB port while registering the USB storage
device (when two or more USB storage devices
are connected, USB storage device registration
is not available).
• The screen prompt pops up.
When the USB storage device is connected to the TV
Register the USB storage device. Follow the on-screen
instructions to register the USB storage device.
• All the data on the USB storage device is deleted after USB
storage device registration.
NOTE
• In order to use time shift, it is necessary to change the
“Quick start” setting to “Auto (Time shift)” or “On”.
• Only one USB storage device for time shift can be
registered on the TV. Two or more USB storage devices
for time shift cannot be used at the same time.
• If a registered USB storage device is inserted, a screen
prompt will not be displayed.
Disconnecting the USB storage device
When you disconnect the USB storage device, be
sure to the following steps.
Go to “HOME” > “TV Menu” > “Setup” >
“View setting” > “Time shift setting” > “Device
removal”.
NOTE
• This menu item cannot be selected when a USB storage
device for time shift is not registered.
• The USB storage device registration for time shift is
cancelled in the following cases:
−
When the USB storage device is removed.
−
When another USB storage device is registered
for time shift; only one USB storage device can be
registered for time shift.
• Recorded data is deleted when removing the USB
storage device or turning off the TV.
Other useful features
