22
Timer setup using EPG
The TV can be switched to a programme or start
recording for time shift at the set time.
1
Press
EPG
.
2
Press
a/b/c/d
to select the programme you
want to set, and then press
;
.
Back to EPG
Watch
No
Time shift
Next
3
Press
c/d
to select “Watch” or “Time shift”,
and then press
;
.
• If you select “No”, the TV returns to the EPG screen.
4
Press
c/d
to select “Yes”, and then press
;
.
• The selected TV programme is marked with an icon.
5
Press
;
to select “Back”.
NOTE
• You cannot select “Time shift” when the registered USB
storage device is not connected to the USB port.
• Only one time shift timer setting can be set.
• A combined total of 16 timer settings (“Watch” and
“Time shift”) can be set.
Cancelling the timer setup
1
Press
EPG
.
2
Press
a/b/c/d
to select the programme with
timer setup, and then press
;
.
3
Press
c/d
to select “Cancel”, and then press
;
.
4
Press
c/d
to select “Yes”, and then press
;
.
E
Cancelling using B button on the
remote control unit
1
Press
EPG
.
2
Press
B
to display the timer setup list.
3
Press
a/b
to select the programme you want
to cancel timer setup, and then press
;
.
4
Press
c/d
to select “Cancel”, and then press
;
.
5
Press
c/d
to select “Yes”, and then press
;
.
Teletext
What is teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped TV. Your
TV receives teletext signals broadcast by a TV
network, and decodes them into graphical format
for viewing. News, weather and sports information,
stock exchange prices and programme previews are
among the many services available.
Turning teletext on/off
1
Select a TV channel or external source providing
a teletext programme.
2
Press
m
to display the teletext.
• Many stations use the TOP operating system, while
some use FLOF (e.g., CNN). Your TV supports both
these systems. The pages are divided into topic
groups and topics. After switching on the teletext,
up to 2,000 pages are stored for fast access.
• If you select a programme with no teletext signal,
“No Teletext available” displays.
• The same message displays during other modes if
no teletext signal is available.
TELETEXT
TELETEXT
• Each time you press
m
, the screen switches as
shown above.
• Press
m
again to display the teletext on the right
screen and the normal image on the left screen.
NOTE
• Teletext will not work if the selected signal type is RGB
(Page 41).
• Teletext will not work in 3D mode.
Buttons for teletext operations
Buttons
Description
:r/s
Increase or decrease the page number.
Numeric
buttons 0
_
9
Directly select any page from 100 to
899 by using the
0
_
9
numeric buttons.
Colour
(R/G/Y/B)
Select a group or block of pages
displayed in the coloured brackets at
the bottom of the screen by pressing
the corresponding colour (
R
/
G
/
Y
/
B
) on
the remote control unit.
k
(Reveal
hidden
teletext)
Reveal or hide hidden information such
as an answer to a quiz.
3
(Freeze/
Hold)
Stop updating teletext pages
automatically or release the hold mode.
[
(Subtitle
for teletext)
Display the subtitle or exit the subtitle
screen.
• Subtitles will not be displayed when
the service does not contain subtitle
information.
1
(Subpage)
Reveal or hide subpages.
• Move to the previous subpage (
R
).
• Move to the following subpage (
G
).
• These two buttons are shown on the
screen by the symbols “
e
” and “
f
”.
;
Display the top menu.
• The top menu will not be displayed
when the service does not support
top menus.
MHEG-5 application (UK only)
Some services bring you programmes with the
MHEG application encoded, letting you experience
DTV interactively. When provided, the MHEG-5
application will start when you press
m
.
NOTE
• MHEG may not be displayed properly in 3D mode.
NOTE
(841 series only)
• You can view some MHEG-5 content even if you do not
perform “Network setup”. Furthermore, “Network setup”
allows you to view additional content such as interactive
content from “HOME” > “TV Menu” > “Setup” > “View
setting” > “Network setup”.
• You cannot view MHEG-5 content when MHEG-5
content is not broadcast even if you perform the
appropriate “Network setup”. Carefully check the
broadcast programme.
Watching TV
