Sharp Aquos LC-60LE600U Service Manual Download Page 44

Page: 44 / 68

LC-60LE600U

7 – 1

LC-60LE600U

Service Manual

CHAPTER 7.

MAJOR IC INFORMATIONS

[1] MAJOR IC INFORMATIONS

1. MAJOR IC INFORMATIONS

1.1. IC3301 (RH-IXD253WJQZQ)

This LSI is FULL HIGH-DEFINITION 1080P DIGITAL TV SYSTEM-ON-A-CHIP.

It combines a transport de-multiplexer, a high definition video decoder, an AC3 audio decoder, a dual-link LVDS transmitter, and a NTSC/PAL/
SECAM TV decoder with a 3D comb filter (NTSC/PAL).

It supports Full-HD MPEG2 video decoder standards, and Hardware JPEG.

Audio support includes a BTSC and a Dolby AC3/MPEG-2 Layer 1, 2, audio decoder.

A SPDIF output and a pair of analog outputs (L-R) are provided.

Integrated peripherals include a USB 2.0, UART, and GPIO controllers.

1.2. IC3501 (RH-IXD361WJQZQ)

This is 512M-bit (32M x 16bit) DDR2-800 synchronous DRAM.

1.3. IC8401 (RH-IXD265WJN4Q)

The 32M-bit SPI flash memory device stores the main CPU program.

1.4. IC8403 (RH-IXD110WJQZY)

This is 8k-bit EEPROM device including the cryptography key data.

1.5. IC1503, IC1504, IC1505, IC508 (VHIS24CS02J-1Y)

This is 2k-bit EEPROM device including the EDID data.

1.6. IC2704 (VHIYDA164EZ-1Y)

The Class-D type digital audio power amplifier YDA164CZ gives maximum continuous output of 10 W/ch.

1.7. IC2703 (VHiAK4201EU-1Y)

This IC is audio amplifier for line-out.

Summary of Contents for Aquos LC-60LE600U





































































Search results

Summary of Contents for Aquos LC-60LE600U

Reviews:

Related manuals for Aquos LC-60LE600U

Brands by name

Popular brands

Sharp Aquos LC-60LE600U, Service Manual

Search results

Summary of Contents for Aquos LC-60LE600U

Reviews:

Related manuals for Aquos LC-60LE600U

Brands by name

Popular brands