Sharp Aquos LC-55UB30U, Setup Manual

Page: 76 / 153

>>
<<
On-Screen Display Menu
ENG 4-11
Example
Initial Setup (Continue)
Input Settings
Input Skip
This setting allows you to skip the TV, HDMI 1, HDMI 2,
HDMI 3, or HDMI 4 on the Input Selection operation.
Advanced
Digital Audio Out
You can output digital audio to an AV amplifier or similar
device whose DIGITAL AUDIO INPUT terminal is connected
to the DIGITAL AUDIO OUT terminal on the TV. Please
select an audio output format compatible with the audio
format of the program you are watching and the equipment
connected.
Off:
Disable this function.
PCM:
For connecting to equipment that does not support
Dolby Digital. The same audio (main, sub, or main/sub)
as the audio of the program being viewed is output.
2-channel audio with a sampling rate of 48 kHz or less is
output as linear PCM audio.
Bitstream:
For connecting to an audio system that
supports Dolby Digital. Audio is output through both the
main and sub channels.
NOTE
Analog channel audio and video input audio are output
in PCM mode even when "Bitstream" is selected.
PCM digital input signals are output in PCM mode even
when "Bitstream" is selected.
Output Select
Allows you to select what controls the audio output.
Fixed:
Sound via speaker is adjusted with
VOL+/-
on the
remote control unit or on the TV.
Sound via the AUDIO OUT terminal is not adjustable and
outputs at a consistent level.
Variable:
Sound via the AUDIO OUT terminal is adjusted
with
VOL+/-
on the remote control unit or on the TV.