Sharp Aquos LC-55UB30U, Setup Manual

Page: 48 / 153

>>
<<
Watching TV
ENG 2-4
Initial Installation (Continue)
Antenna & Cable/STB
Select the type of connection you will use to watch TV.
6
Press / to select "Antenna & Cable" or "Set-top box",
and then press
ENTER
.
To watch TV via an antenna or cable connection
(without using a set-top box):
Select "Antenna & Cable", and then go to step 7.
To watch TV via a set-top box:
Select "Set-top box", and then press
ENTER
.
Check that the set-top box connected to the TV is on.
To watch TV, select the input source corresponding to
the terminal connected to the set-top box. When doing
so, you must make the setting to skip "TV". Press / to
select "On", and then press
ENTER
.
When this is set to "On", the channel on the TV cannot
be changed using the remote control unit or menu. (e.g.
CH
/ , etc.)
See page 4-11 for details on the Input Skip function.
Press
INPUT
to select the input source corresponding to
the terminal connected to the set-top box. Make the
necessary settings on the connected external
equipment.
See the operation manual of the connected equipment
for setting up the equipment.
Air/Cable (Antenna setting)
Make sure what kind of connection is made with your TV
when selecting "Air" or "Cable".
7
Press / to select "Air" or "Cable".
Press
ENTER
to enter the setting.