37
Analogue setting
You can reconfigure the analogue TV channels settings
automatically or manually.
E
Additional search
Use this menu to add new services automatically after
“Analogue search” in the “Auto installation” menu has
been completed.
• Start searching channels after selecting the colour system and
sound system.
E
Manual adjust
Use this menu to set up analogue TV channels manually.
After selecting “Yes” on the screen, press
a/b/c/d
to select the channel you want to
set and then press
;
.
Fine
You can adjust the frequency to the desired position.
NOTE
• Adjust while checking the background picture as a reference.
• Instead of pressing
c/d
to adjust the frequency, you can set
by directly entering the frequency number of the channel with
0
_
9
numeric buttons.
EXAMPLE
• 179.25 MHz: Press 1 > 7 > 9 > 2 > 5.
• 49.25 MHz: Press 4 > 9 > 2 > 5 >
;
.
Colour sys.
Select the optimum colour system to receive (“Auto”,
“PAL”, “SECAM”).
Sound sys.
Select the optimum sound systems (broadcasting
systems) to receive (“B/G”, “D/K”, “I”, “L/L’”).
Label
When a TV channel sends its network name, the “Auto
installation” detects the information and assigns a
name to it. However, you can change channel names
individually.
Select each character of the new name for
the channel with using the software keyboard
(Page 7).
NOTE
• The name can be five characters or less.
Skip
Channels with “Skip” set to “On” are passed over when
using
:r/s
even if selected while watching the image
from the TV.
Decoder
When connecting a decoder to the TV, you need to select
“EXT 1”.
NOTE
• The factory preset value is “Off”.
Lock
You can block the viewing of any channel.
NOTE
• See “PIN” for setting a PIN.
• When “Lock” is set to “On” for a channel, “Child lock has been
activated” displays, and the image and sound of the channel
are blocked.
• When
pressing
6
while “Child lock has been activated”
displays, the PIN input window will display. Inputting the correct
PIN unlocks the “PIN” temporarily until the power is turned off.
E
Sort
Channel positions can be sorted freely.
1
Press
c/d
to select “Yes”, and then press
;
.
2
Press
a/b/c/d
to select the channel you
want to move, and then press
;
.
3
Press
a/b/c/d
to move it to the desired
position, and then press
;
.
4
Repeat steps 2 and 3 until all desired channels
are sorted.
E
Erase programme
Channels can be erased individually.
1
Press
c/d
to select “Yes”, and then press
;
.
2
Press
a/b/c/d
to select the channel you
want to erase, and then press
;
.
• A message window pops up.
3
Press
c/d
to select “Yes”, and then press
;
to erase the selected channel. All the
subsequent channels move up.
4
Repeat steps 2 and 3 until all desired channels
are erased.
Basic adjustment
LC-46LE925E̲GB̲ver4.indd 37
LC-46LE925E̲GB̲ver4.indd 37
2010/08/07 10:58:40
2010/08/07 10:58:40
