Sharp Aquos LC-46LB700X, Operation Manual

Page: 80 / 104

78
Connecting a PC
PC audio select
When using the INPUT 7 terminal or INPUT 1 terminal, you must select which terminal uses the AUDIO (R/L) jack
for analogue audio input.
Selected item Description
INPUT1(HDMI) When connecting devices (including a PC) with DVI/HDMI cable to the INPUT 1 terminal and inputting
analogue audio signals from the AUDIO (R/L) jack.
INPUT7(RGB) When connecting a PC to the INPUT 7 terminal, and inputting analogue audio signals from the AUDIO
(R/L) jack.
NOTE
• You must set this to “INPUT7(RGB)” when connecting devices (including a PC) with an HDMI-certifi ed cable to the INPUT 1
terminal. If “INPUT1(HDMI)” is set, there will be no sound output.
Displaying a PC image on the screen
Selecting the picture size
You can select the picture size as illustrated below.
a
Screen size images.
Input Signal
1024
g
768
Normal
Keeps the original
aspect ratio in a full
screen display.
Cinema
For viewing wide
screen programs.
The top and bottom
of the image is
slightly cropped.
Full
An image fully fi lls the
screen.
Dot by Dot
Detects the resolution
of the signal and
displays an image
with the same
number of pixels on
the screen.
Input Signal
1360
g
768
Normal
Keeps the original
aspect ratio in a full
screen display.
Full
An image fully fi lls the
screen.
Dot by Dot
Detects the resolution
of the signal and
displays an image
with the same
number of pixels on
the screen.
1
Press WIDE .
• The WIDE MODE menu displays.
WIDE MODE
Normal
Cinema
Full
Dot by Dot
(Example)
2
Press WIDE or
a
/
b
to select a desired item
on the menu.
NOTE
• Connect the PC before making adjustments.
• Selectable screen size may vary with input signal type.
LC46LB700X_EN.indb 78 LC46LB700X_EN.indb 78 12/2/2009 8:49:53 AM 12/2/2009 8:49:53 AM