46
Press
MENU
and the MENU screen displays.
1
Press
b/c/d
to select “Option”.
3
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimise the image.
Press
a
/
b
to select a specifi c adjustment
item among “H-Pos.”, “V-Pos.”, “Clock” and
“Phase”.
7
Press
c
/
d
to adjust the item to your desired
position.
8
NOTE
• For resetting all adjustment items to the factory preset values, press
a
/
b
to select “Reset”, and then press
ENTER
.
• Images may not be displayed properly depending on the settings
and/or input signals.
Press
MENU
and the MENU screen displays.
1
Press
b/c/d
to select “Option”.
3
This function enables the screen to be automatically
adjusted to its best possible condition when the
analogue terminals of the TV and PC are connected
with a commercially available RGB cable, etc.
Selected item
Description
H-Pos.
Centres the image by moving it to the left
or right.
V-Pos.
Centres the image by moving it up or
down.
Clock
Adjusts when the image fl ickers with
vertical stripes.
Phase
Adjusts when characters have low
contrast or when the image fl ickers.
Adjusting the PC image automatically
Adjusting the PC image manually
Connecting a PC
Press
c
/
d
to select “Yes”, and then press
ENTER
.
• Auto Sync. starts.
7
NOTE
• Auto Sync. is likely to succeed when an input PC image
has wide vertical stripes (e.g. pattern with high contrast
stripes, or cross-hatched).
It may fail when an input PC image is solid (low contrast).
• Be sure to connect the PC to the TV and switch it on
before starting Auto Sync.
Press
a
/
b
to select “Auto sync.”.
6
Press
a
/
b
to select “Fine sync.”, and then
press
ENTER
.
6
Setup
CH list
Menu
:Back
:Enter
A
udio select
PC input
ȉHUPLQDOVHWWLQJ
[Video + Audio]
Auto sync.
$XWRDGMXVWPHQWRILPDJHGLVSOD\
SDUDPHIHUV
Yes
No
Fine sync.
Image position adjustment, etc.
-1
H-Pos.
0
-89
+90
V-Pos.
-37
+6
0
Clock
-90
+90
-12
Phase
Reset
-20
+20
Press
c/d
to select “Setup”.
2
Press
a
/
b
to select “Terminal setting”, and
then press
ENTER
.
4
Press
a
/
b
to select “PC input” and then
press
ENTER
.
5
Press
c/d
to select “Setup”.
2
Press
a
/
b
to select “Terminal setting”, and
then press
ENTER
.
4
Press
a
/
b
to select “PC input” and then
press
ENTER
.
5
40LE820M_en_vn_id.indd 46
40LE820M_en_vn_id.indd 46
2010/06/11 9:51:15
2010/06/11 9:51:15
