background image

  Sharp LCD-TV with an EU Eco-label

This product has of

fi

 cially been awarded the Eco-label of the European Union, “The Flower” (for details 

see EU Commission Decision 2009/300/EC - OJ L 82/3 dated 28.3.2009). 
Sharp is the 

fi

 rst company to achieve this Eco-label for TVs thus demonstrating its commitment to 

improving our environment.
The Flower is granted only to the products that meet rigorous criteria and demonstrate positive 

contributions towards a better environment.  Further information can be found at: 

http://www.ecolabel.eu

What makes this Sharp product ecologically outstanding?

This TV set uses a Liquid Crystal Display (LCD) instead of the classical Cathode Ray Tube (CRT). Some 
of the advantages are:

 

Design for high energy ef

fi

 ciency. This cuts energy consumption and saves money

.  

 

Reduced energy consumption during use and stand-by. Energy savings in different modes are possible 

(see Appendix in this operation manual.)

 

The lifetime of the background light is approx. 2.5 times longer than that of a CRT.

 

This TV complies with the chemical requirements of the EU Eco-label.

 

 

A minimum of two year functionality are granted in all EU-states.

 

Spare parts will be available after ceasing the production of this model for:

 

seven years, for electrical components

 

fi

 ve years, for mechanical parts

 

four years, for decorative parts

• 

This product has been designed for easy disassembly, recovery and recycling and should not be 

discarded with your ordinary household waste – for further details please refer to the “Information on 

Proper Disposal” mentioned in this operation manual. 

• 

Should repair become necessary, please contact your retailer. You can also contact your local Sharp 

approved service centre (see Sharp local website).

What can you do to contribute towards helping to protect the environment?

• 

Please do not leave your TV in stand-by mode, unplug it when it is not used for a long time. There is 

zero energy consumption if you unplug your TV or nearly zero watt if the TV has a hard-off-switch. The 

location is described in this operation manual.

  

The energy consumption in the on-mode can be reduced by lowering the brightness of the backlight 

when the unit is in operation. This will reduce overall running costs

.

Information on the EU Eco-label

Appendix

Environmental Specifications

*1

 Measured according to IEC 62087 Ed. 2.

*2

 For further information about the Energy Save function, please 

see related pages in this operation manual.

*3

 Measured according to IEC 62301 Ed. 1.

*4

 Measured according to IEC 62301 Ed. 1.

*5

 Annual energy consumption is calculated on the basis of the 

On-Mode (HOME MODE) power consumption, watching TV 4 
hours a day, 365 days a year.

*6

 Annual energy consumption is calculated on the basis of the 

Energy-Save-Mode power consumption, watching TV 4 hours 
a day, 365 days a year.

40"

46"

*1 On-Mode (W) (HOME MODE)

44 W

54 W

*2 Energy-Save-Mode (W) 

ECO

38 W

45 W

*3 Standby-Mode (W)

0.21 W

0.21 W

*4 Off Mode (W) 

0.16 W

0.16 W

*5 Annual Energy Consumption (kWh)

64 kWh

79 kWh

*6 Annual Energy Consumption    
    Energy-Save-Mode (kWh) 

ECO

56 kWh

66 kWh

 39

Summary of Contents for Aquos LC-40LE540E













































Reviews: