24
OPC setting
Automatically adjusts the brightness of the screen.
Press
c
/
d
to select “Picture”.
2
Press
MENU
and the MENU screen displays.
1
Press
a
/
b
to select “OPC”.
Press
c
/
d
to select “On” or “On: Display”.
3
4
Basic adjustment settings
Description
No adjustment
Automatically adjusts
Displays the OPC effect on the screen while
adjusting the brightness of the screen.
Selected item
Off
On
On: Display
NOTE
• When set to “On”, senses the surrounding light and
automatically adjusts the backlight brightness. Make sure
no object obstructs the OPC sensor, which could affect
its ability to sense surrounding light.
• When set to “On: Display”, OPC effect displays on the
screen while OPC is adjusting the screen brightness.
C.M.S. (Color Management System)
Color tone is managed using the six-color adjustment
setting.
Repeat steps 1 and 2 in
OPC setting
.
1
2
3
Press
a
/
b
to select “Advanced”, and then
press
ENTER
.
4
Press
a
/
b
to select “C.M.S-Hue”, and then
press
ENTER
.
Press
a
/
b
to select a specific adjustment
item. Press
c
/
d
to adjust the item to your
desired position.
NOTE
• For resetting all adjustment items to the factory preset
values, press
a
/
b
to select “Reset”, and then press
ENTER
.
• You can select “C.M.S-Saturation” or “C.M.S-
Value” here instead of selecting “C.M.S-Hue”.
Description
This is a standard to adjust the color either
more reddish or more bluish in tone.
Increases or decreases the saturation of a
selected color.
A higher value makes the image brighter.
A lower value makes the image darker.
Selected item
C.M.S-Hue
C.M.S-Saturation
C.M.S-Value
Color temperature
For a better white balance, use color temperature
correction.
Press
a
/
b
to select “Color Temp.”, and then
press
ENTER
.
Description
White with Bluish tone
White with Reddish tone
Selected item
High
Mid-High
Middle
Mid-Low
Low
Repeat steps 1 and 2 in
C.M.S. (Color
Management System)
.
1
2
3
Black
For easier viewing, change the viewing depth by
selecting a level for automatically adjusting the dark
portion of an image.
Press
a
/
b
to select the desired level, and
then press
ENTER
.
Press
a
/
b
to select “Black”, and then press
ENTER
.
Press
c
/
d
to select “On”, and then press
ENTER
.
Repeat steps 1 and 2 in
C.M.S. (Color
Management System)
.
1
2
3
Description
No adjustment
For high detail in black portions
Selected item
Off
On
