Sharp Aquos LC 37GB5U Operation Manual Download Page 39

Page: 39 / 67

Useful adjustment settings

Input Label

Lets you set the input terminal displayed using the
INPUT SOURCE menu or channel display.

Press

MENU

and the MENU screen displays.

Press

to select “Setup”.

Press

to select “Input Label”, and then

press

ENTER

INPUT SOURCE

TV(Air)

DVD

INPUT2

INPUT3

INPUT4

INPUT5

Press

to select the new name for

the channel, and then press

ENTER

(Example)

NOTE

• You cannot change labels if the INPUT SOURCE is TV.

Press

MENU

and the MENU screen displays.

Press

to select the desired mode, and

then press

ENTER

Press

to select “Picture Flip”, and then

press

ENTER

[Standard]: normal image.

[Mirror]: mirror image.

ABC

[Upside Down]: upside down image.

[Rotate]: rotated image.

Picture flip

You can set the orientation of the picture.

Press

INPUT

to select INPUT1.

Press

to select “Setup”.

Summary of Contents for Aquos LC 37GB5U




































































Search results

Summary of Contents for Aquos LC 37GB5U

Reviews:

Sharp Aquos LC 37GB5U, Operation Manual, Page: 39 / 67

Search results

Summary of Contents for Aquos LC 37GB5U

Reviews: