Sharp Aquos LC-32WT1E, Service Manual

Page: 28 / 202

5 - 9
LC-32WD1E/S/RU, LC-37WD1E/S/RU, LC-42WD1E/S/RU, and LC-32/37/42WT1E
[7] SERVICE MODE REMOTE CONTROL KEY AND DESCRIPTION OF DISPLAY
[7.1] Remote Control Key Operation
[7.2] Description of Display
*Where “X” indicates the version of the software package.
[8] SERVICE MENU SETTINGS
Remote
Control Key
Function / Remark
1 - 9 Enter the item number (3-digit format) to go to the specified item.
S
/
T
Press to scroll one-by-one through the service item screens.
W
/
X
Press to change the setting of the selected service item.
END Press to exit the service menus.
CAUTION:
Only the items described in this section should be modified. Do not modify any other settings available in
the service menus.
Item # Item
Available
Settings
Remarks (adjustment details, etc.)
000 GTV
Application Not Applicable 1st line describes the overall SW package version name (See [7.2].)
2nd line describes the UOC/GTV SW version
3rd line on the right describes the PNX SW version
001 Init TV 0 = Off
X
= Activate
Initialization to factory settings. When the factory settings have been made, all
user setting data, including the channel settings, are initialized. (The
adjustments done in the adjustment process mode are not initialized.)
See “Using Init TV” on page 5-10.
276 Gam-20IRE-R 0 - 255 White Point Calibration. See “Using White Point Calibration Items” on page 5-
11.
277 Gam-80IRE-R 0 - 255 White Point Calibration. See “Using White Point Calibration Items” on page 5-
11.
278 Gam-20IRE-G 0 - 255 White Point Calibration. See “Using White Point Calibration Items” on page 5-
11.
279 Gam-80IRE-G 0 - 255 White Point Calibration. See “Using White Point Calibration Items” on page 5-
11.
280 Gam-20IRE-B 0 - 255 White Point Calibration. See “Using White Point Calibration Items” on page 5-
11.
281 Gam-80IRE-B 0 - 255 White Point Calibration. See “Using White Point Calibration Items” on page 5-
11.
858 Virgin bit 0 = Off
1 = On
Puts the TV into virgin mode. When the TV is restarted, the TV will start in virgin
mode. The Auto Install menu (wizard) will start when the TV is restarted, but the
EEPROM settings are not erased. See “Using Virgin Bit” on page 5-11.
001
INTROADRUNNERXX
Init TV 0
00000000
01000000
11000010
00000000
00000000
00111100
Item #
Item Category* Setting