background image

Menu operations

Surround

Menu Operation: A (page 12)

Surround function allows you to enjoy realistic “live” 
sound.

NOTE

•  You can also choose surround effects by pressing 

SURROUND

 on the remote control unit.

Auto Vol.

Menu Operation: A (page 12)

Different sound sources, fairly often do not have the 
same volume level, for example the changing from 
movie to the advertisements. The Automatic Volume 
Control (Auto Vol.) solves this problem and equalises 
the volume levels.

Clear Voice

Menu Operation: A (page 12)

This function emphasises speech voice against the 
background noise for more intelligibility. It is not 
recommended for music sources.

Power Control menu

MENU    

[Power Control]

Power Control

No Signal Off

No Operation Off

[Disable]

[Disable]

Setup

No Signal Off

Menu Operation: A (page 12)

When set to “Enable” the TV will automatically enter the 
standby mode if there is no signal input for 15 minutes.

•  Five minutes before the TV enters standby mode, the 

remaining time displays every minute.

NOTE

•  When a TV programme finishes, this function may not 

operate.

•  This function is not available in DTV mode.

No Operation Off

Menu Operation: A (page 12)

When set to “Enable” the TV will automatically enter 
the standby mode if no operations are performed for 3 
hours.

•  Five minutes before the TV enters standby mode, the 

remaining time displays every minute.

Power Management

Menu Operation: A (page 12)

When set, the TV will automatically enter the standby 
mode.

Off:

  

•  No power management 

 

•  Factory preset value.

Mode1:

  •  If there is no signal input for 8 minutes, the 

TV enters the standby mode.

 

•  Even if you start using the PC and the 

signal inputs again, the TV stays in standby 
mode.

 

•  The TV turns on again by pressing 

a

 on 

the TV or 

B

 on the remote control unit. 

(See page 8.)

Mode2:

  •  If there is no signal input for 8 seconds, the 

TV enters the standby mode.

 

•  When you start using the PC and the signal 

inputs again, the TV turns on.

 

•  The TV turns on again by pressing 

a

 on 

the TV or 

B

 on the remote control unit. 

(See page 8.)

Setup menu

MENU    

[Setup]

Setup

Option

Child Lock

Auto Installation

Programme Setup

Position

WSS

4:3 Mode

[Panorama]

[On]

[Off (0V)]

Supply Voltage

[English]

Language

Auto Installation

You can run Auto Installation again, even after setting 
up the preset channels.

Press 

MENU

 and the MENU screen displays.

Press 

c

/

d

 to select “Setup”.

Press 

a

/

b

 to select “Auto Installation”, and 

then press 

OK

.

 

If you have already set the PIN under “Child 
Lock”, enter it here.

•  See page 17 for setting PIN.

Press 

c

/

d

 to select “Yes”, and then press 

OK

.

You can set language and country the same as 
in the initial auto installation. Follow steps 1 and 
2 on page 8. 

1
2
3

4
5

 15

Item

TV/DTV/AV only

TV/AV only

TV/DTV/AV only

PC only

TV only

LC-32D44E-gb.indd   15

LC-32D44E-gb.indd   15

2008/02/21   9:44:42

2008/02/21   9:44:42

Summary of Contents for Aquos LC-32D44E









































Reviews: