Sharp AQUOS LC-26GA5H, Service Manual

Page: 28 / 167

28
LC-26GA5H/M/X
(4) White balance adjustment sequence
Adjustments can be started with any input at any position. It is also possible to start with either the high-level or
low-level adjustment.
PC side
Repeat until the target
values are achieved.
Repeat until the target
values are achieved.
Set side
Process command enabled (STEP 1)
KRSW0001
Process command enabled (STEP 2)
KKT10037
Command accepted
ERR
Process command enable complete
OK
Two-point adjustment mode set
MSET0000
Two-point adjustment mode set complete
OK
Adjustment value initialized
MSET0004
Adjustment value initialization complete
OK
Low-level adjustment point set
SDML0070 ~
Low-level adjustment started
→
~
High-level adjustment started
→
Low-level adjustment point setting complete
OK
R, G and B adjustments
MGHR X X X X, MGHG X X X X, MGHB X X X X
Adjustment value setting complete
OK
R and B adjustments
MGLR X X X X, MGLB X X X X
Adjustment value setting complete
OK
High-level adjustment point set
SDMH0187
High-level adjustment point setting complete
OK
Adjustment value stored
MSET0003
Adjustment value storage complete
OK
Adjustment complete
Turn off the AC power.
Adjustment value set
Storage of adjustment values
Adjustment value set
High-level adjustment complete
Adjustment pattern display setting
Low-level adjustment complete
Adjustment pattern display setting





