25
Useful adjustment settings
WIDE MODES
You can select the display size by pressing
f
on the
remote control.
NOTE
• “WIDE MODES” cannot be set when the FM radio mode
is selected.
E
Manual selection
1
Press
f
to display the “WIDE MODES” menu
screen.
2
Press
a
/
b
to select “WIDE MODES”. And then
select your desired screen size format among
“NORMAL 4:3”, “CINEMA”, “ZOOM 14:9”,
“PANORAMA”, “FULL” or “AUTO” by pressing
c
/
d
.
NORMAL 4:3:
For 4:3 “standard” pictures. A side
bar appears on each side.
CINEMA:
For 16:9 broadcast cinema movies, etc.
Bars may appear on the top and bottom with some
programmes.
ZOOM 14:9:
A thin side bar appears on each side,
and you may also see bars on the top and bottom
with some programmes.
PANORAMA:
In this mode the picture is
progressively stretched toward each side of the
screen.
FULL:
For 16:9 squeeze pictures.
AUTO:
In this mode the screen size changes
automatically.
When you select “CINEMA”, “ZOOM 14:9” or
“PANORAMA”, you can change the vertical “SIZE” and
vertical “POSITION”.
1
Perform 1 and 2 described on the left to select
“CINEMA”, “ZOOM 14:9” or “PANORAMA”.
2
Press
a
/
b
to select “SIZE” or “POSITION”. The
“SIZE” or “POSITION” indicator will be displayed.
3
Press
c
/
d
to adjust the item to your desired size
and position.
4
Press
OK
if you wish to normalize the vertical
“SIZE” or vertical “POSITION”.
5
Press
END
to exit.
E
Auto selection
Some broadcasting station send the WSS signal with
information of original screen size. When the TV is in
“AUTO” mode and receives the WSS signal, it changes
the screen size automatically.
1
Press
f
on the remote control to display the
“WIDE MODES” screen.
2
Press
a
/
b
to select “WIDE MODES”. And then
select “AUTO” by pressing
c
/
d
.
WIDE MODES
WIDE MODES
SIZE
POSITION
0
0
CINEMA
NORMAL 4:3
CINEMA
ZOOM 14:9
PANORAMA
FULL
AUTO
SELECT
ADJUST
EXIT
NORMAL
FM Radio menu screen
You can make adjustments for FM radio broadcasting
by using
RADIO
on the remote control.
1
Press
RADIO
to display the RADIO MENU screen.
2
Press
a
/
b
to select the preset radio channel.
3
Press
c
/
d
to adjust the volume.
4
Press
END
to exit the MENU screen.
And you can also add a new radio channel or change
the preset channel settings by pressing
OK
.
You can display the TUNE mode by pressing
Red
.
NOTE
• When you are watching the TV through the external
sources (EXT1 or EXT2), and it receives information
of 16:9 format (through the audio-video control pin)
the TV selects “FULL” automatically.
• In order for the “AUTO” to function correctly, the
“WSS” item must be set “ON” in the “GENERAL
SETUP” menu. To check it, see page 21.
Item
When the TV is
receiving
The TV selects
automatically
WSS code 16:9
CINEMA
WSS code 14:9
ZOOM 14:9
WSS code
PANORAMA
LC-26/32/37GA5E(E)_c
04.11.30, 8:28 AM
25
Summary of Contents for AQUOS LC-26GA5E
Page 34: ...32 NOTE ...
