Sharp AQUOS LC-22GA3H Operation Manual Download Page 29

Page: 29 / 33

Problem

Check item

• Make sure the AC adapter is properly inserted in the power

outlet.

• Reception other than those of broadcasting stations can be

considered.

• Make sure the input mode is set to the LCD TV set.
• Make sure the MAIN POWER switch of the LCD TV set is on.

• Make sure Picture adjustment is properly adjusted.
• The fluorescent lamp may have reached the end of its service

life.

• Make sure the S-VIDEO terminal has nothing connected.

• Make sure the volume is not set to minimum.
• Make sure the sound is not set to mute.

• Make sure the antenna cable is properly connected.
• Bad reception can be considered.

• Make sure the antenna cable is properly connected.
• Bad reception could be the problem.

• Check colour adjustment.

(NTSC mode)

• Check if “BACKLIGHT” is set to “DARK”.
• Check “CONTRAST”.
• The fluorescent lamp may have reached the end of its service

life.

• Check if batteries in the remote control have sufficient power.
• Make sure the remote sensor window is not under strong

lighting.

• External influences such as lightning, static electricity, etc., may

cause improper operation. In this case, operate the unit after
first turning the power off, or unplugging the AC cord and re-
plugging it in after 1 or 2 minutes.

Reference

page

Picture

There is no
picture or sound.

There is no
picture.
There is no
picture from
AV-IN1/2/3.

There is no
sound.

The picture is
not clear.

The picture is too
light or improp-
erly tinted.

The picture is
too dark.

Remote control does not work.

There is no
picture or sound,
just noise.

Sound

Picture

■

Cautions regarding use in high and low temperature environments

• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed.

This is not a malfunction, and the unit will recover when the temperature returns to normal.

• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a

heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
(Storage temperature: –20°C to +60°C)

Before calling for repair services, check the following items for possible remedies to the encountered symptoms.

LCD TV set

–

10
10

–

8, 27

11
11

6
–

21
16

–

5
5

–

Troubleshooting

Unit cannot be operated.

LC-22GA3H_E_P26-30.p65

2004.9.9, 5:43 PM

Summary of Contents for AQUOS LC-22GA3H


































Search results

Summary of Contents for AQUOS LC-22GA3H

Reviews:

Related manuals for AQUOS LC-22GA3H

Brands by name

Popular brands

Sharp AQUOS LC-22GA3H, Operation Manual

Search results

Summary of Contents for AQUOS LC-22GA3H

Reviews:

Related manuals for AQUOS LC-22GA3H

Brands by name

Popular brands