24
To let you enjoy NICAM broadcasting, this LCD TV set receives
NICAM stereo system, bilingual, and monaural broadcasts.
Stereo
The LCD TV set is receiving a stereo broadcast.
• Each time you press
MPX
, the mode changes between
“NICAM STEREO” and “MONO”.
• When “MONO” is selected, the TV sound is output monaurally.
49
NICAM
STEREO
49
MONO
Bilingual
The LCD TV set is receiving a bilingual broadcast.
• Pressing
MPX
changes the audio mode in the order shown
below.
• M1=main sound, M2=sub sound, or MONO=monaural sound,
can be selected.
49
NICAM
M1
49
NICAM
M2
49
MONO
Monaural
The LCD TV set is receiving a monaural broadcast.
• Each time you press
MPX
, the mode changes between
“NICAM MONO” and “MONO”.
49
NICAM
MONO
49
MONO
NOTE
• If approximately 3 seconds pass without a button being pressed,
the mode setting is automatically terminated and the LCD TV set
returns to the normal mode.
• The setting can be selected individually for each channel number.
(When stereo sound is received)
(When monaural sound is received)
NICAM Broadcast Selection
(When main sound is selected)
(When sub sound is selected)
(When monaural sound is selected)
If the sound quality is poor due to a weak signal or other
problems during NICAM broadcast reception, set the “OFF”
position of the NICAM to change the TV sound to monaural.
Press
MENU
to display the Menu screen.
Press
\
/
|
to select “SETUP”.
Press
'
/
"
to select “CH SETUP”, and press
OK
.
Press
'
/
"
to select “MANUAL”, and press
OK
.
Press
'
/
"
to select “NICAM”, and press
\
/
|
to select
“OFF”.
•
When the NICAM sound is set to the “OFF” position, the
TV sound is output in monaural.
Press
MENU
to exit.
(When the “OFF” position is selected)
15
NICAM
NOTE
• When the NICAM sound is set to the “OFF” position,
MPX
cannot
be used to change the audio mode (stereo and bilingual settings).
2
1
6
3
5
4
P O S I T I O N C H 1
C O L O U R S Y S T E M A U T O
S O U N D S Y S T E M B / G
S K I P O F F
F I N E 8 7 1 . 1 M H Z
N I C A M O F F
A 2 O F F
0
LC-22GA3H_E_P19-25.p65
2004.9.9, 5:26 PM
24
