5
Part Names of the Remote Control
(Power)
Switches the LCD TV set power on or
standby.
Channel Select
TV input mode:
Selects the channel.
This LCD TV set allows you to select
up to 99 channels (1 to 99).
Teletext mode:
Selects the page.
(P. 15)
(Flashback)
Switches the channels between the
currently tuned one and the previous
one.
(Wide Mode)
(P. 13)
Switches the Wide mode between
Auto, 4:3 and 16:9 modes.
Auto
4:3
16:9
(Sound)
(P. 10)
Switches to the sound mode.
Right/Left Selection
(P. 8)
(Teletext)
(P. 15)
Displays the Teletext mode screen.
OK, Programme Table
(P. 8,13)
END
(P. 8)
Returns to normal screen.
Upwards/Downwards Selection
(P. 8)
(Reveal)
(P. 15)
Displays hidden information such as
solutions to riddles and puzzles.
(Hold)
(P. 15)
Temporarily holds the current Teletext
page.
Colour (Red/Green/Yellow/Blue)
(P. 15)
TELETEXT: Select a page.
(Subtitle)
(P. 15)
Displays the Teletext Subtitle directly.
(Subpage)
(P. 15)
Displays the Teletext Subpage directly.
(Top/Bottom/Full)
(P. 15)
Set the area of magnification in
Teletext mode.
MENU
(P. 8)
Displays the TV menu.
Returns to the previous screen.
BACKLIGHT
(P. 9)
Switches the brightness of the display
between Bright, Medium and Dark.
Backlight : Bright
Backlight : Medium
Backlight : Dark
(Mute)
Switches the sound on and off.
S o u n d : O f f
S o u n d : O n
When
(+)/(–)
is pressed in the
Mute mode, the sound turns on, and
the volume indicator is displayed.
The Mute function is cancelled when
is pressed.
(+)/(–) (Volume)
Changes the sound volume.
Volume
1
0
P ( )/( ) (Channel)
TV input mode:
Selects the channel.
Channel “0” is reserved for RF output
of VCR.
Channels not set with “Automatic
search” or via “Setup” are set to be
skipped and therefore cannot be
displayed using
P
( )/( )
.
Teletext mode:
Selects the page.
(P. 15)
(Input)
Switches the input source between
EXT1, EXT2, EXT3, PC and TV
modes.
EXT1
EXT1
1 S- 6
TV
PC
PC
EXT2
EXT2
Mode:
EXT3
EXT3
NOTE
EXT:
Select this mode when viewing
the signals from the video equipment
connected to the EXT1 (21-pin Euro-
SCART) terminal.
EXT2:
Select this mode when viewing
the signals from the decoder and other
audio-visual equipment connected
to the EXT2 (21-pin Euro-SCART)
terminal.
EXT3:
Select this mode when viewing
the signals from the video equipment
connected to the EXT3 terminals using
the VIDEO or S-VIDEO terminal for
video input.
If both VIDEO and S-VIDEO terminals
are connected with cables, the S-
VIDEO input terminal is selected as the
high priority.
PC:
Select this mode when viewing the
signals from the PC connected to the
PC terminals.
SLEEP
(P. 13)
Set the sleep timer on (in units of 30
min. up to max. 2 hr.) and off.
(Display Information)
The status display appears by
pressing
.
•
•
•
•
•
•
•
•
NOTE
There is a protective film covering the face of the remote control. Please remove this film before use.
•
