4
Installing Batteries in the Remote Control
Before using the LCD TV set for the first time, install the two “AA” size batteries (supplied) in the remote control. When the batteries
become depleted and the remote control fails to operate, replace the batteries with new “AA” size batteries.
Using the Remote Control
Preparation (continued)
Caution!
Precautions regarding batteries
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.
Different types of batteries have different characteristics. Do not mix batteries of different types.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old batteries to
leak chemicals.
Remove batteries as soon as they are depleted. Chemicals that leak from batteries can cause a rash. If chemical leakage is
found, wipe it off with a cloth.
The batteries supplied with the LCD TV set may have a shorter operating time due to storage conditions.
If the remote control is not to be used for an extended period of time, remove the batteries from the remote control.
•
•
•
•
•
1
Press and slide the battery cover
to open it.
2
Insert two supplied “AA” size batteries.
Place batteries with their terminals
corresponding to the (+) and (–)
indications in the battery compartment.
•
3
Close the battery cover.
30°
5m
30°
Remote control sensor
Use the remote control by pointing it towards the remote sensor window of the main unit. Objects between the remote control and
sensor window may prevent proper operation.
Cautions regarding use of the remote control
Do not apply shock to the remote control. In addition, do not expose the remote control to
liquids, and do not place it in an area with high humidity.
Do not install or place the remote control in direct sunlight. The heat may cause deformation
to it.
The remote control may not work properly if the remote sensor window is in direct sunlight
or strong light. In such a case, change the angle of the lighting or main unit, or operate the
remote control closer to the remote sensor window.
•
•
•
