E-8
EN
Assembling the glass shelf
Falling prevention (optional)
Fix the safety wire or
chain to the wall using
a wall anchor bracket
which is commercially
available.
It is recommended to secure the fixture to the
wall with a safety wire or chain before attach-
ing the TV to prevent it from toppling over in
case of earthquake occurrence.
Screw
Washer
Safety wire
(commercially
available)
surface
Step 1
Fix the left (S) and right (T) Glass Shelf Supports to the Centre
Bar using 4 pieces of M6 [16mm] screws (K) as shown. Fas-
ten them with Allen key M6 (P).
Step 2
Remove the transparent glass protective sheet at the bottom
surface of the glass. Top surface has a label affixed on it.
Peel off the separator of the double sided tape on the Glass
Protectors. Slot in 2 pieces of Glass Protector at the corners
of the glass as shown below.
Step 3
Peel off the separator of the double sided tape on the
left and right Glass Shelf Supports.
Double sided tape
Double
sided
tape
Label
Top surface
Glass protective
sheet
AN-WS350_OM_EN.indd 8
2009-08-19 23:01:34
