Sharp AN-52AG6, Operation Manual

Page: 19 / 76

E-5
ENGLISH
When installing in an LCD television with a bracket pitch of 200mm
Use one of the following assembly configurations to assemble the based
bracket in accordance with the height of the LCD television to be installed. For
each configuration, follow the stamped instruction marks (see below) on based
brackets A and B to assemble the bracket.
Assembly configuration (1)
Height: Standard (The height can be c5cm
after the bracket is installed to the wall.)
Based bracket A: Stamped mark D
Based bracket B: Stamped mark A
Assembly configuration (2)
Height: +5cm (The height can be changed -5cm after
the bracket is installed to the wall.)
Based bracket A: Stamped mark D
Based bracket B: Stamped mark B
•
The stamped marks “b” to “f” in the center of the based bracket B show the screen
center positions for the various LCD television models.
163mm
163mm
•
Refer to the following figures for the locations of based bracket stamped marks A
to D.
A
B
B
A
A C D D C
C D D C
B
B
A
Based bracket A
Based bracket B
Based bracket A
Based bracket B
Stamped
mark C
Stamped
mark D
Stamped
mark C
Stamped
mark A
Stamped
mark B
Stamped
mark A
Based
bracket B
Based
bracket A
D D C C
D D C C
Based
bracket B
Based
bracket A
Stamped
mark C
Stamped
mark C
Stamped
mark D
Stamped
mark A
Stamped
mark B
Stamped
mark A
AN-52AG6.indd 19 AN-52AG6.indd 19 10.4.27 4:10:45 PM 10.4.27 4:10:45 PM