Sharp AN-52AG6, Operation Manual

Page: 25 / 76

E-11
ENGLISH
Installing the LCD color TV on the wall
• Be sure to use at least 2 people when installing the LCD color TV to the based bracket.
• Be sure to perform Steps 1 and 2 below. Only performing Step 1 could result in the display
falling and injuring someone.
Install the wall-mount brackets attached to the LCD color TV to the
based bracket.
The protruding pins of the wall-mount brackets catch on the slots of the based bracket.
Use the screws to fasten the wall-mount brackets and based bracket.
(Be sure to do this.)
Use 2 screws
A
(M5, 8 mm) to fasten the top or bottom of the bracket. However, it might not
be possible to fasten the bottom of the bracket depending on the LCD color TV model and the
angle setting. In this case, fasten the top of the bracket.
Caution
Check the protruding pin slots.
2
1
Check the protruding pin slots.
AN-52AG6.indd 25 AN-52AG6.indd 25 10.4.27 4:10:47 PM 10.4.27 4:10:47 PM