Sharp AL-2051 Operation Manual Download Page 99

Page: 99 / 173

SCANNER FUNCTIONS

Storing scanning settings - Network Scanning

Click "Network Scanning" in the
menu frame of the Web page.

Click "Add" below the scan list.

If you need to change the settings in a
previously stored scan mode, select the
scan mode and click "Edit". To delete a
scan mode, select the scan mode and click
"Delete".

Select the desired scanning settings.

Refer to the following table for information on each setting.

When you have finished selecting the settings, click "Submit".

The selected settings are stored.

Scan Mode settings

Item

Description

Default

setting

Name

Enter a name for the scan mode (up to 32
characters).

—

Color Mode

Select Full Color, Grayscale, or Mono 2 gradation for
the color mode.

Full Color

Resolution

Select the resolution.

150 dpi

Void Area

Select "On" to not scan the 4 mm around the edges
of the image and instead attach a white border.

Off

Summary of Contents for AL-2051














































































































































































Search results

Summary of Contents for AL-2051

Reviews:

Sharp AL-2051, Operation Manual, Page: 99 / 173

Search results

Summary of Contents for AL-2051

Reviews: