Sharp AL-2051 Operation Manual Download Page 136

Page: 136 / 173

USER SETTINGS

134

LANGUAGE

1: AMERICAN

ENGLISH

2: ENGLISH
3: FRENCH
4: SPANISH
5: ------
:
:

18: Brazilian

portuguese

This is used to set the language
used in the display.
18 Languages can be selected.

RESET FACTORY

1: Yes

2: No

This is used to return all settings
to the factory default settings.

SORT AUTO
SELECT

1: ON

2: OFF

Use this setting to enable or
disable sort auto select mode.

CHECK RSPF
OPEN

1: ON

2: OFF

• You can set the operation that

takes place if the [START] key
(

) is pressed when the

RSPF is not completely closed.
(For details on the "Check RSPF
open function", see page 15.)

VALID COPY
WIDTH

1: A4

2: B5

• Set the allowed paper sizes for

copying from the bypass tray.
When "B5" is selected, a copy
of a letter size original will only
be printed up to invoice size.

LSU SETTING

1: ON

2: OFF

• Select whether copying is only

allowed when the polygon
motor is rotating, or also when
the polygon motor is stopped.

PAPER TYPE

1: PLAIN PAPER

2: HEAVY

PAPER

• Set the temperature of the

fusing unit when the bypass
tray is used.

DISPLAY
CONTRAST

1: LIGHTER
2: LIGHT

3: NORMAL

4: DARK
5: DARKER

• Set the contrast of the display.

DATE & TIME SET

• Set the date and time to be

used for fax or other purpose.

DATE & TIME
FORMAT

1: TIME FORMAT

1: 12 HOUR

2: 24 HOUR

• Select the time format of 12

hours or 24 hour pattern.

2: DATE FORMAT

1: MMDDYYYY

2: DDMMYYYY

3: YYYYMMDD

• Select the date format among

the 3 patterns.

Program

number

Program name

Setting codes

(factory default

setting appears

in bold)

Explanation

Summary of Contents for AL-2051














































































































































































Search results

Summary of Contents for AL-2051

Reviews:

Sharp AL-2051, Operation Manual, Page: 136 / 173

Search results

Summary of Contents for AL-2051

Reviews: