Sharp AL-2051 Operation Manual Download Page 44

Page: 44 / 173

INSTALLING THE SOFTWARE

Read the "Readme First" in the "Welcome" window and then
click the "Next" button.

To install all of the software, click
the "Standard" button and go to
step 11.

To install particular packages,
click the "Custom" button and go
to next step.

Click the "MFP Driver" button.

Click the "Display Readme" button to
show information on packages that are
selected.

The files required for installation of the MFP driver are copied.

Follow the on-screen instructions.

When "The installation of the SHARP software is complete." appears, click
the "OK" button.

• If you are using Windows Vista or 7 and a security warning window

appears, be sure to click "Install this driver software anyway".

• If you are running Windows 2000/XP and a warning message

appears regarding the Windows logo test or digital signature, be sure
to click "Continue Anyway" or "Yes".

Summary of Contents for AL-2051














































































































































































Search results

Summary of Contents for AL-2051

Reviews:

Sharp AL-2051, Operation Manual, Page: 44 / 173

Search results

Summary of Contents for AL-2051

Reviews: