17
MAKING COPIES
Normal copying
NORMAL COPYING
Units digit
Tens digit
●
For manual copy density adjustment, press the AUTO/MANUAL/
PHOTO (
/
/
) key to select MANUAL (
) and
adjust with the light (
) and dark (
) keys as desired.
●
For photographs, select PHOTO (
) and then adjust with the light
(
) and dark (
) keys as desired.
●
There are 5 exposure steps indicated by 3 indicator lights. (The
indicators light up one or two at a time.)
If exposure level 2 is selected, the two left-handmost indicators for that
level will light up simultaneously. Also, if level 4 is selected, the two
right-handmost indicators for that level will light up simultaneously.
6
Set the number of copies using the two copy quantity
(
,
) keys.
●
Press the right copy quantity key to set the units digit from 0 to 9. This
key will not change the tens digit.
●
Press the left copy quantity key to set the tens digit from 1 to 9.
●
A single copy can be made with the initial setting, i.e., when “0” is
displayed.
●
Press the CLEAR (
) key to clear an entry if a mistake is made.
7
Press the START (
) key.
●
The number in the copy quantity display will decrease by 1 each time
a copy is made.
●
Press the CLEAR (
) key to stop copying in the middle of a run.
Stream feeding mode
If the stream feeding mode has been enabled using user program No. 4,
the SPF indicator will continue to blink for approximately 5 seconds after
feeding of all originals is completed. While this indicator is blinking, any
new originals placed in the SPF will be fed and copied automatically. See
page 42, USER PROGRAMS.
Summary of Contents for AL-1650
Page 63: ...61 MEMO ...
Page 64: ...MEMO ...
