Sharp AL-1041 - B/W Laser Printer Operation Manual Download

Page: 36 / 47

Copier trouble?

TROUBLESHOOTING

If any problem occurs, check the list below before contacting the Sharp Service Center.

See
page:

–

Solution

Copier does not
operate.

Blank copies

Copier plugged in?

Problem Possible

cause

Plug the copier into a grounded
outlet.

Power switch on?

Turn the power switch on.

Side cover closed
securely?

Gently close the side cover.

Front cover closed?

Gently close the front cover and
then close the side cover.

Is the original placed face
down on the original
table?

Place the original face down on
the original table.

Power save ( )
indicator on.

Is the copier in the
preheat mode?

Press any key to cancel the
preheat mode.

Adjust the exposure manually.

Adjust the automatic exposure
level.

Is original image too dark
or too light?

Is the copier in the
automatic exposure
mode?

Is the copier in the auto
power shut-off mode?

Press the print (

) key to

cancel the auto power shut-off
mode.

Copies are too
dark or too light.

Is the copier in the photo
exposure mode?

Cancel the photo exposure
mode.

Dust, dirt,
smudges appear
on copies.

Original table or original
cover dirty?

Clean regularly.

Use a clean original.

Original smudged or
blotchy?

–

White lines in
the copies

Paper misfeeds
frequently.

Is the copier lens clean?

Clean the copier lens.

Striped copies

Is transfer charger clean?

Clean the transfer charger.

Non-standard paper
used?

Use standard paper. If using
special papers, feed the paper
through the bypass tray.

Paper curled or damp?

Store copy paper flat in the
wrapper in a dry location.

Pieces of paper inside
copier?

Paper damp?

Remove all pieces of misfed
paper.

Paper guides in the paper
tray not set properly?
Too much paper in the
paper tray or bypass tray?

Set the guides properly
depending on the paper size.
Remove excessive paper from
the tray.
Use copy paper within the
specified range.

Replace with dry copy paper. If
the copier is not used for long
time, remove the paper from the
paper tray and store it in its
wrapper in a dry location.

Is the copy paper too
heavy?

Images rub off
the copy easily.

Summary of Contents for AL-1041 - B/W Laser Printer
















































Search results

Summary of Contents for AL-1041 - B/W Laser Printer

Reviews:

Related manuals for AL-1041 - B/W Laser Printer

Brands by name

Popular brands

Sharp AL-1041 - B/W Laser Printer, Operation Manual

Search results

Summary of Contents for AL-1041 - B/W Laser Printer

Reviews:

Related manuals for AL-1041 - B/W Laser Printer

Brands by name

Popular brands