Sharp AF-R80CX Installation And Operation Manual Download Page 12

Page: 12 / 20

POWER

ON/OFF

SELECTOR

TIMER

ON/OFF

ENERGY

SAVER

COOL / FAN

TEMP

SELECTOR indicator

SELECTOR pad

TO CHANGE FAN SPEED AND OPERATION MODE

During operation

Touch SELECTOR pad and select the
operation mode and fan speed.

• SELECTOR indicator and display will light

in order as you touch.

HOW TO OPERATE

NOTES ON OPERATION MODE:

SELECTOR

DISPLAY

HIGH COOL

MED COOL

LOW COOL

HIGH FAN

MED FAN

LOW FAN

• The latest operation mode will be memorized and the selector indicator and display will light

when the unit is turned on.

• In fan only operation, the temperature display will go off.
• When the SELECTOR is changed to fan only operation from cooling operation, it will take 5

seconds for the compressor to stop.

COOL

FAN

MODE

Cooling operation with high fan speed.

Cooling operation with medium fan speed.

Cooling operation with low fan speed.

Fan only operation with high fan speed.

Fan only operation with medium fan speed.

Fan only operation with low fan speed.

HIGH COOL

MED COOL

MED FAN

LOW FAN

LOW COOL

HIGH FAN

Summary of Contents for AF-R80CX





















Search results

Summary of Contents for AF-R80CX

Reviews:

Related manuals for AF-R80CX

Brands by name

Popular brands

Sharp AF-R80CX, Installation And Operation Manual

Search results

Summary of Contents for AF-R80CX

Reviews:

Related manuals for AF-R80CX

Brands by name

Popular brands