13
13
Copyright © All rights reserved, SHARP CORPORATION
Confidential
2.5 Precautions for installation location, dew condensation, water drops and salt damage
• This product is for use indoors. Please do not to be exposed to weather and direct sunlight when installing. They cause breakdown and degradation.
• Humidity condition for IDP
• Range of humidity condition for IDP : From 20% to 80%(no condensation)
• Dew condensation and/or liquid drops will cause the breakdown of the circuit
and/or LCD panel. Please install LCD away from condensation and liquid drops.
• About dew condensation
The environment which has high possibility of condensation
• Place where temperature is generally low but has frequent warm air flow.
(For example : the place in front of the vents of radiators. When the radiator is turn on in a cold winter morning, condensation occurs.)
• Near the sea, lake, mountain and so on where humidity is high
• The environment which has high possibility of water drops
• “Semi-outdoor” place where strong winded-rain(typhoon) could potentially reach the monitor. The place which is below the pipes inside the ceiling. (When
installing in these places, countermeasures should be taken to avoid water drops to reach the monitors. For example, covering the LCD monitor with box. In
such a case, do not install in a place where the wind is blowing.)
• Caution for the wind of the typhoon
• Please install so that you can remove the influence from the wind.
• Caution for salt damage
• Please consult with an authorized SHARP servicing dealer with us in advance when installing near the sea where salt damage may occur.
• Caution for sulfide
• Please don’t install near the hot spring and volcano where there may occur the influence from sulfide.
• Caution for organic gas and flammable gas
• Please don’t install the place where there may be organic gas and flammable gas.
About installation location, dew condensation, water drops and salt damage
