background image

25

Using the Video and Audio Input Jacks

Connecting video device equipped with video output terminal.

CONNECTIONS

AIR

or

CABLE

VIDEO 1

(IN 1)

Rear

VIDEO 2

(IN 2)

Front

VIDEO 3

(IN 3)

Rear

L

R

AUDIO

VIDEO

IN 1

IN 3

IN 1

IN 3

S-VIDEO

LINE

OUT

LINE IN

VIDEO

L-AUDIO-R

IN 2

CAMCORDER

VIDEO EQUIPMENT

TV GAME

To AUDIO OUTPUT

To VIDEO OUTPUT

(Front connection 

terminals of TV)

Signal

(Rear connection terminals of TV)

TO S-VIDEO OUTPUT

(When your video equipment has an S-VIDEO output terminal).

TO S-VIDEO OUTPUT

(When your video equipment 

has an S-VIDEO output terminal).

Video Equipment

To AUDIO INPUT (L)
To AUDIO INPUT (R)

To VIDEO INPUT

To AUDIO INPUT (L)

To AUDIO INPUT (R)

To VIDEO INPUT

Signal

Signal

NOTE:

L

Connecting video equipment for playback of video material.

• When the television is connected to video equipment as shown below, the material being played back on the video equipment can be seen

on the television screen.

L

To watch video material playback.

• Press the Remote’s 

INPUT to select the VIDEO INPUT mode to which the video equipment you want to playback is connected.

• The external VIDEO INPUT mode will change as follows each time the

 INPUT is pressed.

• INPUT mode can be selected by pressing either the 

CH UP (

8

) on the TV remote control when the TV is set to the highest channel stored

in memory, or by pressing the

 CH DOWN (

9

) when it is set to the lowest channel.

• When connecting video or audio equipment to the television, be sure that the power is turned off in order to prevent damage to either the

television or the equipment being connected.

• An S-VIDEO terminal has priority over its corresponding VIDEO terminal (IN 1 or IN 3). When you want to watch pictures from video

equipment connected to a VIDEO terminal, unplug equipment connected to the corresponding S-VIDEO terminal.

• It is the intent of SHARP that this product be used in full compliance with the copyright law of the United States and that prior permission be

obtained from copyright owners whenever necessary.

• For detailed information on the connection and use of auxiliary equipment, refer to the instruction manuals of the equipment being used.
• The connection cords can be obtained from your local video store.

Summary of Contents for 32N-S500









































Reviews: