Sharp 32L-S500, Service Manual

Page: 10 / 76

10
32L-S500,32L-X2000
CL32S50,36L-X2000
ADJUSTMENT ITEM
Table - A
C04 BRIGHT-C (BRIGHTNESS) 58 00~101
C05 SHARP-C (SHARPNESS) 00 00~27 Must be set to "00"
C06 V-POSITION-C 00 00~07 Must be set to "00"
C07 H-POSITION-C 19 00~31
C08 R CUT-OFF-C 64 00~255
C09 G CUT-OFF-C 64 00~255
C10 B CUT-OFF-C 64 00~255
C11 G (R) DRIVE-C 64 00~127
C12 B DRIVE-C 64 00~127
C13 VSM GAIN-C 02 00~03 Must be set to "02"
C14 COMP. C-DECODER 105 00~255 Must be set to "105"
SERVICE
NUMBER
INITIAL VALUE
RANGE
DATA
ADJUSTMENT CONTENTS
NECESSARY
UNNECESSARY
ADJUSTMENT
NOTES
PART REPLACED
IC2001
IC2002
X
IC3001
X
CRT
X
IC401
X
X
IC1801
Data is stored in IC2002.
The adjustment is needed to compensate for characteristics
of parts including IC401.
Holding down both the CH-up/down buttons on the TV set in
the service mode for more than 2 seconds will automatically
write the above initial values into IC2002. Then perform a
complete adjustment.
Adjust items related to picture tube only.
Adjust items related to MTS only (M01~M05).
Holding down both the CH-up/down buttons on the TV set at service mode for more than 2 seconds will automatically
write the above initial values into IC2002.
Adjust items related to P-IN-P only (P01~P07).
X
Table - C
ADJUSTMENT ITEM
I01 E-SOUND 01 00 / 01 01 01
I02 DSE 01 00 / 01 00 01
I03 SRS 01 00 / 01 00 01
I04 SRS 32, 36/27 01 00 / 01 01 01
I05 A/V IN 3/2 01 00 / 01 00 01
I06 V-CHIP 01 00 / 01 01 01
I07 PIP ON/OFF 01 00 / 01 01 01
I08 COMPNENT 01 00 / 01 00 01
I09 ENGL/ESPA 01 00 / 01 01 01
I10 DSE SHIPPED POSITION 00 00 / 01 00 00
SERVICE
NUMBER
INITIAL VALUE
DATA
RANGE 32L-S500, CL32S50 32/36L-X2000
ADJUSTMENT CONTENTS
Table - B