Sharp 32D4U - LC - 32" LCD TV Operation Manual Download Page 10

Page: 10 / 61

Supplied accessories

Make sure the following accessories are provided with the product.

NOTE

• Always use the AC cord supplied with the LCD-TV.

Remote control unit (

Page 7

“AAA” size battery (

Page 7

Page 6

AC cord (

Cable clamp (

Page 6

Cable tie (

Page 6

Operation manual (

Trademarks

• Manufactured under license from BBE Sound, Inc.

Licensed by BBE Sound, Inc. under USP5510752 and 5736897. BBE and BBE symbol are registered trademarks of
BBE Sound, Inc.

• BBE Mach3Bass extends the bass response of a given loudspeaker and provides deep, tight and musically accurate

bass frequencies.

• “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI

Licensing LLC.”

• CableCARD™ is a trademark of Cable Television Laboratories, Inc.

• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are

trademarks of Dolby Laboratories.

Summary of Contents for 32D4U - LC - 32" LCD TV






























































Search results

Summary of Contents for 32D4U - LC - 32" LCD TV

Reviews:

Related manuals for 32D4U - LC - 32" LCD TV

Brands by name

Popular brands

Sharp 32D4U - LC - 32" LCD TV, Operation Manual

Search results

Summary of Contents for 32D4U - LC - 32" LCD TV

Reviews:

Related manuals for 32D4U - LC - 32" LCD TV

Brands by name

Popular brands