28
Basic adjustment settings
No signal off
When set to “Enable”, the power will automatically shut
down if no signal inputs for 15 minutes.
Press
a
/
b
to select “No Signal Off”, and
then press
ENTER
.
Press
c
/
d
to select “Enable”, and then
press
ENTER
.
3
4
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• “Disable” is factory preset value.
• When a TV program finishes, this function may not operate.
Press
c
/
d
to select “Power Control”.
Press
MENU
and the MENU screen displays.
No operation off
When set to “Enable”, the power will automatically shut
down if there is no operation for 3 hours.
Press
a
/
b
to select “No Operation Off”, and
then press
ENTER
.
Press
c
/
d
to select “Enable”, and then
press
ENTER
.
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• “Disable” is factory preset value.
Repeat steps 1 and 2 in
No signal off
.
2
1
Disable
Enable
3
2
1
Power Control
Power control setting allows you to save energy.
Digital Setup
This setting allows you to optimize the settings of Digital
broadcasting.
Audio Setup
You can output digital audio to an AV amplifier or similar
device whose DIGITAL AUDIO INPUT terminal is
connected to the DIGITAL AUDIO OUTPUT terminal
on the TV (see page 30). Please select an audio output
format compatible with the audio format of the program
you are watching and the equipment connected.
1
2
3
Press
MENU
and the MENU screen displays.
Press
c
/
d
to select “Digital Setup”.
Press
a
/
b
to select “Audio Setup”, and then
press
ENTER
.
4
Press
a
/
b
to select “PCM” or “Dolby
Digital”, and then press
ENTER
.
Selected item
Description
PCM
Dolby Digital
The optical output terminal outputs
audio signal by PCM form. If your
digital audio system does not
support Dolby Digital, select
“PCM”.
The optical output terminal outputs
audio signal by Dolby Digital form.
It reproduces sound from surround
program of digital.
PCM
Dolby Digital
