Sharp 28LF-94H, Operation Manual

Page: 16 / 32

ENGLISH - 15 -
Program
By pressing “ ” or “ ” button, select Program. By pressing
“ ” / “ ” or digit buttons, you can select the program num-
ber. There are 100 program storage between 0 and 99.
Color Norm
By pressing “ ” or “ ” button, select Color norm. By press-
ing “ ” or “ ” button, you can change the standard to
AUTO or PAL .
Standard
The " Standard " setting is fixed to " I ". You cannot change
this item's setting.
Search
By pressing “ ” or “ ” button, select Search. By pressing
“ ” button, you can enter Search menu.
6($5&+
6($5&+
&+$11(/
%$1' &
If you can not tune to a channel, try APS.
Search
By pressing “ ” or “ ” button, select Search. By pressing
“ ” button, you can start Search. When you start the chan-
nel searching “SEARCHING ” is written and when a chan-
nel was found which has been searched, “FOUND” is writ-
ten across the SEARCH item in the menu above.
When word “FOUND” it appears, is not possible to select
“CHANNEL” or “BAND” by pressing the “ ” or “ ” button.
Press “
M ” button to select these items.
Channel
By pressing “ ” or “ ” button, select Channel. By pressing
“ ” / “ ” or digit buttons, you can change the channel num-
ber.
Band
By pressing “ ” or “ ” button, select Band. By pressing
“ ” or “ ” button, you can change the Band to
C or S .
To Store the Settings
• Press “ OK ” button to store Search menu settings.
• “ STORED ” will be displayed.
To exit the Search menu, press “ M ” button.
Fine Tuning
By pressing “ ” or “ ” button, select Fine Tuning. By
pressing “ ” or “ ” button, you can fine tune the program
manually.
352*5$00,1*
1$0(
&2/251250 $872
67$1'$5' ,
6($5&+
),1(781,1*
Name
By pressing “ ” or “ ” button in Programming menu, se-
lect Name. You can change the program name. When you
select the Name, cursor is on the first letter. By using “ ” or
“ ”‚ buttons you can select the letter. By pressing “ ” or
“ ” button, you can move the cursor to second or third letter
of the program name. Name can be 5 digit length.
To Store the Settings
• Press “ OK ” button to store Programming menu settings.
• “ STORED ” will be displayed at the bottom of the menu.
• Press “ M ” button to exit programming menu.
Execution APS:
By pressing “ ” or “ ” button, select Execution APS in In-
stallation menu. By pressing “ ” button, you can enter Exe-
cution APS menu.
(;(&87,21$36
$//352*5$06:,//%(
&/($5('
2.67$5779&$1&(/
If you want to cancel APS, press “ ” button, you return to
Installation menu. If “ OK ” button is pressed, APS function
starts and the following menu comes to the screen.
$36,65811,1*3/($6(:$,7
352*5(66
&+$11(/
79&$1&(/
(;(&87,21$36
After APS is completed, the PROGRAM TABLE is dis-
played.
FKDQJH
GHOHWH
79 L
(;,7
• Press “ ” or “
79
” button to exit Program Table.
Note: To enter PROGRAMME TABLE directly, press “ ”
button.
• See
Page 9 Program Table explanation.